Touch Screen Control Safety Nets Building Materials Flammability Tester For Resistance Performance

Touch Screen Control Safety Nets Flammability(flame retardant) Tester

Application

It is suitable for different safety nets, Fine mesh safety vertical net flammability resistance Performance.

Technical parameters

1. Touch screen display / control

2. The equipment is divided into two parts: touch screen control box and combustion box. The size of the combustion box is 330*330*765mm.

3. The front part of the combustion box is a tempered glass observation door

4. The top of the box is evenly distributed with 16 vent holes, the inner diameter is 12.5mm; there are 6 vent holes on both sides of the combustion box, and the inner diameter is 12.5mm.

5. Top of the box is attached to the top

6. The top of the box is equipped with a hanging clamp, and the bottom of the style clamp is located 17mm above the highest point of the igniter nozzle.

7. The inner diameter of the igniter nozzle is 11mm, and the head and the vertical line are at an angle of 25°. Ignition time: accurate to 0.05s

8. Gas source: industrial grade propane, butane or propane / butane mixed gas, using methane gas with a purity of not less than 97% when the sample is pretreated according to 7.3

9. Sample size: 500±5

10. Ambient temperature: -10 ° C ~ 30 ° C

11. Power supply voltage and power: 220V±10% 50HZ Power less than 100W

12. Single-chip control, digital display automatic timing

13. Bunsen burner flame time 0-99M99S, can be arbitrarily set, accuracy ± 0.01s

14. Yu Yan, afterglow time: the longest 0-99M99S

15. Bunsen burner blue flame height: 15mm-175mm can be adjusted freely, with flame height scale

16. Bunsen burner automatic ignition time: arbitrary setting

17. Touch screen related parameters:

a. Size: 7 inches Effective display size Length 15.5cm Width 8.6cm;

b. Resolution: 800*480

c. Communication interface RS232, 3.3V CMOS or TTL, serial port mode

d. Storage capacity: 1G

e. Use pure hardware FPGA driver display, “zero” startup time, run on power

f. Using M3+FPGA architecture, M3 is responsible for command parsing, FPGA focuses on TFT display, speed and reliability are leading the same scheme

g. The main controller uses a low-power processor to automatically enter the energy-saving mode.

Design standards

GB 5725-2009 safe net

Applicable standards

GB5455-2014 "Textiles Combustion performance Vertical release Damage length, smoldering and afterflame time determination"

SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support services like lab layout, calibration testing procedures / standards, recording techniques and operations of equipment, etc. We have agents to support you in over 10 countries around the world. With a network of representatives providing sales and technical support world-wide.

SKYLINE has achieved good repute in the fields of Fire Testing Equipment, Footwear Testing Equipment, Toy Testing Equipment, Furniture Testing and other lab test equipment.

SKYLINE focus on the lab testing equipment for decads and  we manufacturers the testing instrument as per the international standards like EN71, ASTM, IS 8124 and SRS.

Our major customers are BV, ITS, TUV, SGS, Hasbro and SASO, For these customer 100% testing instruments are supplied by SKYLINE and we are the continuous supplier for these lab. Since SKYLINE is a manufacturer design/develop with advanced technology and having well experienced Technicians which will provide high quality service after sale.

Our main products

Lab Testing Equipment

Flammability Testing Equipment

Fire Testing Equipment

Wire and Cable Fire Tester

Building Material Fire Tester

Toys Testing Equipment

Environmental Test Chamber

Textile Testing Equipment

Furniture Test Machine

Mattress Testing Machine

Temperature And Humidity Test

Our Service

Testing Equipment Design and manufacture

Test Lab Planning and Establish

Toys Test Equipment Upgrade

Toys Test Equipment operation Training

Toys Finish Goods and Mattress  Inspection

Acting for Customer Testing and Certifying

Acting for Foreign Trading Company Quality Inspection

Please have a look at our website and don’ t hesitate to contact us if any items catch your interest. We will do our best to meet your requirement.
Thank you for visiting. We look forward to your inquiry to carry forward win-win cooperation with you soon.