China Categories
125V 40W PLC Programmable Logic Controller IC695PSA040F GE Fanuc Power Supply
Ask Latest Price
Brand Name:GE
Model Number:IC695PSA040(F)
Price:negotiable
Payment Terms:TT West Union
Supply Ability:100
Delivery Time:2-3 work days
Company Data
Verified Supplier
Contact Person
Becky
Business Type:
Importer Exporter Trading Company Seller
Officials:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
PLC Programmable Logic Controller GE Fanuc IC695PSA040F RX3i PacSystem IC695PSA040 power supply
Product Description
The IC695PSA040 is a 120/240 volt AC or 125 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series. See specifications for this unit on IC695PSA040's website page.
Technical Specifications
Output Power: 40 Watts max
Output Voltage: 24 VDC, 5.1 VDC or 3.3 VDC
Output Current: 0-1.6 A, 0-6 A, or 0-9 Amps
Rated Voltage: 120/240 VAC or 125 VDC
Input Voltage Range: 85 to 264 VAC or 100 to 300 VDC
Number of Slots: 2
Specifications
Nominal Rated Voltage Input Voltage Range AC DC | 120/240 VAC or 125 VDC 85 to 264 VAC 100 to 300 VDC |
Input Power (Maximum with Full Load) | 70 Watts maximum |
| Inrush Current | 4 Amps, 250 milliseconds maximum * |
| Output Power | 40 Watts maximum total 5.1 VDC = 30 Watts maximum 3.3 VDC = 30 Watts maximum The maximum total output power available depends on the surrounding air temperature, as shown. |
| Output Voltage | 24 VDC: 19.2 VDC to 28.8 VDC 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
| Output Current | 24 VDC: 0 to 1.6 Amps 5.1 VDC: 0 to 6 Amps 3.3 VDC: 0 to 9 Amps |
| Isolation (input to backplane): | 250 VAC continuous; 1500 VAC for 1 minute |
| Ripple (all outputs) | 150 mV |
| Noise (all outputs) | 150 mV |
| Ride-through time | 20 ms. This is the length of time the Power Supply maintains valid outputs if the power source is interrupted |
| Wiring Terminals | Each terminal accepts one 14 AWG to 22 AWG wire. |
| Current per Terminal | 6 Amps |
| Number of Daisy-Chained PSA040 Supplies | Up to 4 |
Revision History
| Version | Date | Details |
| IC695PSA040J | May 2013 | Increases the margin of the 5V and 3.3V under voltage detectors to prevent PS faults during power-up. |
| IC695PSA040H | Aug. 2012 | Resolves an issue with powering up under light loads. |
| IC695PSA040G | Jun. 2011 | Hardware modification improves radiated RF susceptibility and removes the requirement to install control systems that use this product in a grounded metal enclosure to meet the EU EMC Directive. |
| IC695PSA040F | Sep. 2006 | Hardware modification. Previous versions of this Power Supply occasionally failed to power up when installed in a 16-Slot Universal Backplane, IC695CHS016. This update resolves the issue. |
| IC695PSA040E | Mar. 2006 | The D version of this Power Supply (IC695PSA040D) incorrectly reported that it was a PSA140 power supply, causing a Configuration Mismatch error. The E version and versions prior to D report their identification correctly. |
| IC695PSA040A | Oct. 2005 | Initial release |
FAQs
What is an IC695PSA040?
The IC695PSA040 is a 120/240 VAC or 125 VDC, 40 Watt Power Supply
from the GE Fanuc RX3i Series.
From what input voltage source range does IC695PSA040 operate?
This power supply operates from an input voltage source range of 85
to 264 VAC or 100 VDC to 300 VDC.
What 3 outputs does this power supply have?
- +5.1 VDC output
- +24 VDC relay output that can be used to power circuits on Output Relay modules
- +3.3 VDC which, is used internally by RX3i modules with IC695 catalog numbers
How many IC695PSA040's can be installed in a PACSystems RX3i Universal Backplane?
Only 1
With what can IC695PSA040 not be used?
This power supply cannot be used with other RX3i power supplies in redundant or increased capacity modes.
What do the 4 LEDs indicate?
Power (Green/Amber). When this LED is green, it indicates power is being supplied to the backplane. When this LED is amber, power is applied to the power supply, but the power supply switch is off.
P/S Fault (Red). When this LED is lit, it indicates the power supply has failed and is no longer supplying sufficient voltage to the backplane.
Over Temperature (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum operating temperature.
Overload (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum output capability on at least one of its outputs.
What should I do if my IC695PSA040 is not working properly?
Your IC695PSA040 may need repair .
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
Company Profile
Shenzhen Wisdomlong Technology CO.,LTD
Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays,
dirves,encoder, servo drive,soft starter,touch
screen,instrument,process control,electric transmission and factory
automation aspects of the project design,software
programming,technical service and staff training. Our company
locats at the central of China,Shenzhen, Guangdong Province. With
rapid development, Wisdomlong serves fields of automation in global
markets, Our business covers five continents throughout the world
with the basic conviction of honest, the international management
of customer-centered concept and purpose of bringing convenience to
customers. We have confidence to bring our customers more
substantial profit with high-quality service and reasonable prices.
Choosing us,you will choose a sincere friend and reliable partner.
Please feel free to contact us if you are a global manufacturer of
high quality brand products who desires to enter the Chinese market
or who searches for a Chinese agent.We would like to create a
brilliant future with friends in domestic and overseas. All goods
sold have one year warranty.
The company with domestic and international numerous well-known
brands supplier to build have extremely good relations of
cooperation, in Japan, South Korea, southeast Asia, Africa, Europe
and the United States, and formed a stable and efficient supply
network. The agent and the products are widely used in machinery,
equipment manufacturing, electric power, metallurgy, petrochemical,
automobile manufacturing industry, paper making, chemical industry,
medicine and aerospace industries.
Our Main Brand:
MITSUBISHI
YASKAWA
PANASONIC
GE FANUC
EMERSON
FISHER-ROSEMOUNT
HONEYWEL
ABB
AB
SHNEIDER MODICON
SIEMENS
................
Send your message to this supplier
You May Like
16 I/O Numbers Industrial Automation Using PLC Controller FX2N-16MR-001 24V
16 - 384 Points Mitsubishi Melsec Programmable Logic Controls FX3U-16MT/DSS
6W Max FX3UC / FX3U Automotive Programmable Logic Controller FX3UC-16MT/D
FX3GA Series Mitsubishi Plc Controller FX3GA-24MR / FX3GA-40MR / FX3GA-60MR-CM
14 - 256 Points I/O Mitsubishi PLC Programmable Logic Controller FX3G-40MR/ES-A
FX3GE Series Mitsubishi PLC Programmable Logic Controller FX3GE-24MT FX3GE-24MT/ES
MELSEC-Q Series PLC Programmable Logic Controller Q173DSCPU / Q172DSCPU
IC693CPU350-EK PLC Programmable Logic Controller GE Fanuc 9030 PLC CPU Module
IC693CMM321 Ethernet Plc Controllers , SERIES 90-30 Io Ethernet Module 4 Channels
Lightweight Ethernet Control Module , IC693CMM321ethernet Interface Module In Plc
GE Fanuc PLC Programmable Logic Controller IC697PWR711J Series 90-70 Slot Rack Module
Inquiry Cart
0