Fully Auto IEC Test Equipment Electric Water Kettle Testing Machine With PLC Touch Screen Control

Fully Auto IEC Test Equipment Electric Water Kettle Testing Machine With PLC Touch Screen Control


Product information:
The electric water kettle tester is designed and manufactured according to IEC 60335-2-15 clause 19.101, 19.102, 22.103 and etc.
It is suitable for comprehensive lifespan testing of various types of conventional cordless electrothermal kettle, complete simulation of artificial water boiling mode.
The whole without staff care, failure alarm.
Each station configured independently, without mutual interference. Very low fault rate.

Basic functions:
Contains five functions: dry heating (self-cooling), dry heating (water cooling), withdraw (without current), withdraw (with current), cyclic boiling water.
1. Dry heating (self-cooling): start--kettle pouring-kettle back to origin-- dry heating end (temperature controller jumped) --natural cooling to the thermostat reset -- cyclic dry heating
2. Dry heating (water cooling):
Start -- kettle pouring -- began to dry heating -- dry heating end (thermostat trip)--water cooling to the thermostat reset (water volume adjustable) -- kettle pouring-- cyclic dry heating kettle;
3. Withdraw (without current): Start -- began to withdraw (cycle work);
4. Withdraw (with current): Start -- injecting water (water volume adjustable) -- withdraw (with current) -- cycle work--change the water interval (can be set times) -- cycle work;
5. Cyclic boiling water: Start--kettle pouring-kettle back to origin--injecting water (can set the injection water volume)--heating and boiling water--after the water is boiled (thermostat trip)--kettle pouring --kettle back to origin--cycle work.

Control system:
Use PLC and touch screen control system, operation is stable, maintenance is simple and convenient.
The parameter setting and each station working state information can be controlled and displayed on the touch screen.
With independent design life detection board to monitor products working state, alarm occurs when there is abnormal and fault.
The equipment can automatically count, the test times can be set, when it reaches to the preset value, the equipment will stop working.

Main control parameters:
1) Water pouring time: 1~9999(s) adjustable; kettle back to origin time: 1~9999(s) adjustable
2) Water injection time: 1~9999(s) adjustable; cooling time: 1~9999(s) adjustable
3) Withdraw conduction time: 1~9999(s) adjustable; withdraw break off time: 1~9999(s) adjustable
4) Rest set: 1~9999(times) adjustable; rest time: 1~9999(s) adjustable
5) Test times: 1~9999(times) adjustable; actual counting times: 1~9999(s) adjustable

Main techinical parameteters:

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.